We offer a delivery and collection service.
Ride-On Mower
For a ride on lawnmower service, based on a 2-year-old machine, we would recommend budgeting around €160 – €250.
The service includes the following. Service prices correct as of :- Season Beginning 2022
- Start up & test run
- Check general condition for damage
- Check battery
- Check tyre pressure & condition
- Inspect all belts, pulleys, fuel lines, cutting spindles, bearings and housings
- Check blade condition & sharpen or replace the blades as necessary
- Change oil and filter (if fitted)
- Clean, or change, air filter
- Clean or renew spark plug(s)
- Check full operation of machine & safety systems
This service includes around 3 hours of labour to carry out the checks, which is priced at €160 +VAT.
!These prices are only advisory and not a quotation!
Petrol Rotary Mower
A service for a 2-year-old petrol rotary lawn mower would cost around €80 – €100.. Service prices correct as of :- Season Beginning 2022
- Check machine starting
- Check overall condition of the machine
- Clean, sharpen & balance rotary blade
- Change engine oil
- Clean or change spark plugs as required
- Check fuel system
- Check, clean and lubricate the wheels
- Inspect wheel adjusters
- Test run of the machine, with full operation and safety check
As part of the service, there is around 1 and a half hours of labour to complete the work and checks. This is priced at €80 + VAT.
!These prices are only advisory and not a quotation!
To arrange a price specific to your machine please phone us on the below number or visit us at our workshop where helpful staff will asses a quote for your specific machine and requirements.
Petrol Chainsaw
A petrol chainsaw would normally cost between €65 – €90 to service, based on a 2-year-old machine. Please note that a service does not include sharpening. Sharpening is available at an additional cost, please call us for more information. Service prices correct as of Season Beginning 2022
- Clean or replace the air filter as required
- Clean or renew fuel filter as necessary
- Clean or change spark plugs depending on the condition
- Check chain brake function
- Assess chain condition
- Check fuel pump function
- Test run the machine and check the operation of both the machine and safety system
This service includes an hour of labour which is charged at €65 + VAT.
!These prices are only advisory and not a quotation!
To arrange a price specific to your machine please phone us on the below number or visit us at our workshop where helpful staff will asses a quote for your specific machine and requirements.
Petrol Strimmers & Leaf Blowers
The process and cost for a petrol strimmer or leaf blower service is relatively very similar to a petrol chainsaw service. This is because the engines are very similar. For a 2-year-old machine, you should budget between €65 – €100 These services consist of the following. Service prices correct as of Season Beginning 2022
- Clean or replace the air filter as required
- Clean or renew fuel filter as necessary
- Clean or change spark plugs depending on the condition
- Check fuel pump function
- Test run the machine and check the operation of both the machine and safety system
This service includes an hour of labour which is charged at €65 + VAT.
!These prices are only advisory and not a quotation!
To arrange a price specific to your machine please phone us on the below number or visit us at our workshop where helpful staff will asses a quote for your specific machine and requirements.
Petrol Hedge Cutter
A typical service for a petrol hedge cutter, over 2 years old, is around €65 – €100 As with chainsaw servicing, sharpening is not included as part of the service. This is available at an additional cost, please contact us for a quote. The service does include the following. Service prices correct as of Season Beginning 2022
- Check the air filter and clean or replace this as necessary
- Clean or replace the fuel filter
- Clean or change the spark plugs
- Inspect exhaust
- Inspect fuel system
- Check machine function and operation of the safety systems
This service includes an hour of labour which is charged at €65 + VAT.
(Sharpening blades & Parts will incur additional costs)
!These prices are only advisory and not a quotation!
To arrange a price specific to your machine please phone us on the below number or visit us at our workshop where helpful staff will asses a quote for your specific machine and requirements.